Steel Grade | SS 304 |
Brand | Jindal |
Thickness | 0.1 mm |
Surface Treatment | Polished |
Technique | Hot Rolled |
Material | SS |
Shape | Rectangular |
Size | 1220 mm x 2440 mm (4' x 8') |
Applications of Stainless Steel 304/304L/304H Sheets
Chemical Composition of Stainless Steel 304/304L/304H Sheets
Specification | Chemical Composition | ||||||||
---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | N |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
SUS304L | 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
SUS304H | 304H | 0.04-0.10 | 0.75 | Max.2.00 | Max.0.045 | Max.0.030 | - | 8.00-10.50 | 0.1 |
Mechanical Properties
Grade | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness | |
min | min | min | Rockwell B (HR B) | Brinell (HB) | |
max | max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
Physical Properties
Grade | Density (kg/m3) | Elastic Modulus | Mean Coefficient of Thermal Expansion | Thermal Conductivity | Specific Heat | Electrical Resistivity | |||
(GPa) | 0-100°C | (n·.m) | |||||||
0-100°C | 0-315°C | 0-543°C | at 100°C (W/m.K) | at 500°C (W/m.K) | ( J/kg.K) | ||||
(·m/m/°C) | (·m/m/°C) | (·m/m/°C) | |||||||
304/L/H | 7900 | 193 | 17.2 | 17.8 | 18.4 | 16.3 | 21.5 | 500 | 720 |
Minimum Order Quantity | 200 Kilogram |
Thickness | 0.5 mm |
Brand | Jindal |
Shape | Rectangular |
Material | Stainless Steel |
Tensile Strength | 515 Mpa |
Yield Strength | 205 Mpa |
Elongation | 40% |
Density | 8 g/cm3 |
Finish | Matt PVC |
Melting Range | 1400 Deg C |
Hardness (Brinell) | 201 |
STAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304 | 304 Stainless | S30400 | 1.4301 | 8 |
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.08 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
Minimum Order Quantity | 200 Kg |
Thickness | 0.5 mm |
Technique | Hot Rolled |
Material | Stainless Steel |
Brand | Jindal |
Tensile Strength | 515 Mpa |
Yield Strength | 205 Mpa |
Elongation | 40% |
Density | 8 g/cm3 |
Melting Range | 1400 Deg C |
Hardness (Brinell) | 201 |
Applications of Stainless Steel 304 BA Finish Sheets
STAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304 | 304 Stainless | S30400 | 1.4301 | 8 |
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.08 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
Thickness | 0.5 mm |
Size | 1250 mm x 2500 mm |
Material Grade | SS 202 |
Brand | Jindal |
Technique | Hot Rolled |
Shape | Rectangular |
Material | SS |
Finish | Mirror Finish |
Industrial Use of Stainless Steel sheets
Thickness | 0.5 mm |
Steel Grade | SS 304 |
Shape | Rectangular |
Technique | Cold Rolled |
Brand | Jindal |
Material | SS |
Surface Finish | Matte Finish |
DM Metalloys Pvt. Ltd. is one of the leading manufacturer, supplier, and stockist of stainless steel sheets, located in Mumbai. We manufacture stainless steel sheets as per the international standards on basis on ASTM, ASME, DIN and UNS and quality used by us is trusted from vendors and it is tested before delivering to the customers. We provide various series and types of sheets and also customization is offered as per the requirements of customer. For fabrication purposes, keep in mind that 300 series stainless steel sheet cannot be heat treated, but does work harden rapidly, is ductile, and is austenitic (nonmagnetic).
Size | 1220 mm x 4880 mm |
Technique | Hot Rolled |
Shape | Rectangular |
Steel Grade | 304L |
Brand | Jindal |
Material | SS |
Thickness | 0.1 mm |
Surface Finish | Satin Finish |
Applications of Stainless Steel 304/304L/304H Sheets
Chemical Composition of Stainless Steel 304/304L/304H Sheets
Specification | Chemical Composition | ||||||||
---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | N |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
SUS304L | 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
SUS304H | 304H | 0.04-0.10 | 0.75 | Max.2.00 | Max.0.045 | Max.0.030 | - | 8.00-10.50 | 0.1 |
Mechanical Properties
Grade | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness | |
min | min | min | Rockwell B (HR B) | Brinell (HB) | |
max | max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
Grade | Density (kg/m3) | Elastic Modulus | Mean Coefficient of Thermal Expansion | Thermal Conductivity | Specific Heat | Electrical Resistivity | |||
(GPa) | 0-100°C | (n·.m) | |||||||
0-100°C | 0-315°C | 0-543°C | at 100°C (W/m.K) | at 500°C (W/m.K) | ( J/kg.K) | ||||
(·m/m/°C) | (·m/m/°C) | (·m/m/°C) | |||||||
304/L/H | 7900 | 193 | 17.2 | 17.8 | 18.4 | 16.3 | 21.5 | 500 | 720 |
Minimum Order Quantity | 200 Kg |
Thickness | 0.31 mm |
Brand | Jindal |
Grade | SS 430 |
Country of Origin | Made in India |
Material | SS |
Surface Finish | Mirror Finish |
Size | 4' x 8' |
Minimum Order Quantity | 5 Kilogram |
Yield Strength | 170 Mpa |
Density | 8 g/cm3 |
Material | Stainless Steel |
Brand | Jindal |
Tensile Strength | 485 Mpa |
Elongation | 40% |
Hardness (Brinell) | 201 |
Melting Range | 1400 Deg C |
Application:
Specification:
STAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304L | 304 Stainless | S30403 | 1.4307 | 8 |
Chemical Composition
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.03 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 12.0 | Balance |
Minimum Order Quantity | 200 Kg |
Shape | Rectangular |
Brand | Jindal |
Thickness | 3 mm to 150 mm |
Material | Stainless Steel |
Steel Grade | SS 304 |
Standard | ASTM |
Applications of Stainless Steel 304/304L/304H Plates
Chemical Composition of Stainless Steel 304 Plates
Specification | Chemical Composition | ||||||||
---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | N |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
Mechanical Properties:
Grade | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness | |
min | min | min | Rockwell B (HR B) | Brinell (HB) | |
max | max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
Physical Properties:
Grade | Density (kg/m3) | Elastic Modulus | Mean Coefficient of Thermal Expansion | Thermal Conductivity | Specific Heat | Electrical Resistivity | |||
(GPa) | 0-100°C | (n·.m) | |||||||
0-100°C | 0-315°C | 0-543°C | at 100°C (W/m.K) | at 500°C (W/m.K) | ( J/kg.K) | ||||
(·m/m/°C) | (·m/m/°C) | (·m/m/°C) | |||||||
304/L/H | 7900 | 193 | 17.2 | 17.8 | 18.4 | 16.3 | 21.5 | 500 | 720 |
Minimum Order Quantity | 100 Kg |
Size | 1220 mm x 4880 mm |
Material | Stainless Steel |
Steel Grade | SS 316 |
Technique | Cold Rolled |
Country of Origin | Made in India |
Brand | Jindal |
Thickness | 2-3 mm |
Finish | 2B |
Shape | Rectangular |
DM Metalloys Pvt. Ltd. is renowned manufacturer, exporter and supplier of stainless steel 316/316l/316ti sheets at a large scale. 316/316l is basically for severe environments. Type 316/316l/316ti is also austenitic, non-magnetic, and thermally non hardenable stainless steel. The carbon contented is held to 0.08% at extreme, while the nickel gratified is increased somewhat. Molybdenum proliferations the corrosion resistance of this chromium-nickel alloy to tolerate attack by many industrial chemicals and solvents. It increases carbon content which delivers a greater tensile and yield strength. A312, A376, A358, A269 are international standards on which basis the products are mass-produced.
Applications of Stainless Steel 316 Sheets
Element | 316/316L | 316Ti |
---|---|---|
C | 0.08 max | 0.08 max |
Mn | 2.0 max | 2.0 max |
Si | 1.00 max | 1.00 max |
P | 0.045 max | 0.045 max |
S | 0.03 max | 0.03 max |
Cr | 16.00-18.00 | 16.00-18.00 |
Ni | 10.0 - 14.00 | 10.0 - 14.00 |
Mo | 2.0 - 3.0 | 2.0 - 3.0 |
Other Element | - | Ti5xCmin |
Minimum Order Quantity | 100 Kg |
Usage / Application | Building & Construction |
Technique | Cold Rolled |
Standard | ASTM A240 |
Country of Origin | Made in India |
Surface Treatment | Polished |
Finish | 2B |
Material | Stainless Steel |
Brand | Jindal |
Sheet Thickness | 1 mm |
Minimum Order Quantity | 100 Kg |
Finish | No. 4 |
Technique | Cold Rolled |
Material | Stainless Steel |
Shape | Rectangular |
Brand | Jindal |
Thickness | 4 - 6 mm |
Steel Grade | SS 316 |
DM Metalloys Pvt. Ltd. is renowned manufacturer, exporter and supplier of stainless steel 316/316l/316ti sheets at a large scale. 316/316l is basically for severe environments. Type 316/316l/316ti is also austenitic, non-magnetic, and thermally non hardenable stainless steel. The carbon contented is held to 0.08% at extreme, while the nickel gratified is increased somewhat. Molybdenum proliferations the corrosion resistance of this chromium-nickel alloy to tolerate attack by many industrial chemicals and solvents. It increases carbon content which delivers a greater tensile and yield strength. A312, A376, A358, A269 are international standards on which basis the products are mass-produced.
Applications of Stainless Steel 316/316L/316TI Sheets
Element | 316/316L | 316Ti |
---|---|---|
C | 0.08 max | 0.08 max |
Mn | 2.0 max | 2.0 max |
Si | 1.00 max | 1.00 max |
P | 0.045 max | 0.045 max |
S | 0.03 max | 0.03 max |
Cr | 16.00-18.00 | 16.00-18.00 |
Ni | 10.0 - 14.00 | 10.0 - 14.00 |
Mo | 2.0 - 3.0 | 2.0 - 3.0 |
Other Element | - | Ti5xCmin |
Material Grade | SS 316L |
Finish | 2D |
Material | Stainless Steel |
Thickness | 0.1 mm |
Brand | Jindal |
Shape | Rectangular |
Size | 1250 mm x 2500 mm |
Applications of Stainless Steel 316/316L/316TI Sheets
Element | 316/316L | 316Ti |
---|---|---|
C | 0.08 max | 0.08 max |
Mn | 2.0 max | 2.0 max |
Si | 1.00 max | 1.00 max |
P | 0.045 max | 0.045 max |
S | 0.03 max | 0.03 max |
Cr | 16.00-18.00 | 16.00-18.00 |
Ni | 10.0 - 14.00 | 10.0 - 14.00 |
Mo | 2.0 - 3.0 | 2.0 - 3.0 |
Other Element | - | Ti5xCmin |
Minimum Order Quantity | 100 Kg |
Finish | No.4 Finish |
Density | 8 g/cm3 |
Material | Stainless Steel |
Shape | Rectangular |
Steel Grade | SS 304 |
Country of Origin | Made in India |
Brand | Jindal |
Elongation | 40% |
Thickness | 2-3 mm |
Melting Range | 1400 Deg C |
Tensile Strength (Mpa) | 515 |
Yield Strength (Mpa) | 205 |
Hardness (Brinell) | 201 |
TAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304 | 304 Stainless | S30400 | 1.4301 | 8 |
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.08 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
Minimum Order Quantity | 100 Kg |
Finish | 2B Finish |
Material | Stainless Steel |
Country of Origin | Made in India |
Shape | Rectangular |
Brand | Jindal |
Steel Grade | SS 304 |
Density | 8 g/cm3 |
Thickness | 2-3 mm |
Melting Range | 1400 Deg C |
Elongation % | 40 |
Tensile Strength (Mpa) | 515 |
Yield Strength (Mpa) | 205 |
Hardness (Brinell) | 201 |
Applications of Stainless Steel 2B Finish 304/304L/316/316L Sheets
Specification of Stainless Steel 2B Finish Sheets
STAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304 | 304 Stainless | S30400 | 1.4301 | 8 |
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.08 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
Thickness | 0.1 mm |
Material Grade | SS 304 |
Finish | 2B |
Material | Stainless Steel |
Standard | ASTM |
Shape | Rectangular |
Brand | Jindal |
Country of Origin | Made in India |
DM Metalloys Pvt. Ltd. is a foremost manufacturer, exporter and supplier of stainless steel 304/304L/304H stainless sheets in India. We supply all of the stainless steel 304/304L/304h sheets for use in the oil or natural gas industries. At our reputed organization, we want to defense that you're receiving the right kind and quality of Stainless Steel 304/304L/304H sheets, ASTM A312, ASTM A213, ASTM A249, and ASTM A554. With our extensive information, we can support your company from preservation to construction of new projects. Various sizes and stipulations are provided by us to our customers as per their requirements.
Applications of Stainless Steel 304/304L/304H Sheets
Chemical Composition of Stainless Steel 304/304L/304H Sheets
Specification | Chemical Composition | ||||||||
---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | N |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
SUS304L | 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
SUS304H | 304H | 0.04-0.10 | 0.75 | Max.2.00 | Max.0.045 | Max.0.030 | - | 8.00-10.50 | 0.1 |
Mechanical Properties
Grade | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness | |
min | min | min | Rockwell B (HR B) | Brinell (HB) | |
max | max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
Grade | Density (kg/m3) | Elastic Modulus | Mean Coefficient of Thermal Expansion | Thermal Conductivity | Specific Heat | Electrical Resistivity | |||
(GPa) | 0-100°C | (n·.m) | |||||||
0-100°C | 0-315°C | 0-543°C | at 100°C (W/m.K) | at 500°C (W/m.K) | ( J/kg.K) | ||||
(·m/m/°C) | (·m/m/°C) | (·m/m/°C) | |||||||
304/L/H | 7900 | 193 | 17.2 | 17.8 | 18.4 | 16.3 | 21.5 | 500 | 720 |
Shape | Rectangular |
Tensile Strength | 515 Mpa |
Elongation | 40% |
Material | Stainless Steel |
Yield Strength | 205 Mpa |
Country of Origin | Made in India |
Finish | No. 8 |
Brand | Jindal |
Steel Grade | SS 304 |
Density | 8 g/cm3 |
Thickness | 2-3 mm |
Melting Range | 1400 Deg C |
Hardness (Brinell) | 201 |
Applications of Stainless Steel 304/304L/316/316L No.8 Finish Sheets
STAINLESS STEEL | TRADENAME | UNS NO. | WERKSTOFF NO | DENSITY (G/CM3) |
---|---|---|---|---|
304 | 304 Stainless | S30400 | 1.4301 | 8 |
C | MN | SI | P | S | CR | NI | FE | |
304 | 0.08 max. | 2.00 max. | 1.00 max | 0.045 max. | 0.03 max. | 18.0 – 20.0 | 8.0 – 10.5 | Balance |
Minimum Order Quantity | 100 Kg |
Surface Treatment | Cold Rolled,NO4PVC,Mirror Finish |
Type | Sheet |
Brand | Jindal,Posco,Cromeni |
Color | Silver |
Shape | Rectangular |
Country of Origin | Made in India |
Thickness | 4 - 6 mm |
Usage/Application | Industrial |
Stainless Steel Sheets, SS Sheet, 316 Stainless steel sheets, ss 316 sheets, 316 ss sheets, ss 316 sheet price,316 Stainless Steel Sheets,304 SS Sheets, Stainless steel sheet price, ss sheet price, SS 304 sheets, 409 Stainless Steel Sheets, 409M Stainless steel plates, 409M Stainless steel sheets, X2CRNI12 Sheets, X2CRNI12 Plates,202 Stainless Steel Sheets, 202 Stainless steel plates
DM Metalloys Pvt. Ltd. is one of the leading manufacturer, supplier, and stockist of stainless steel sheets, located in Mumbai. We manufacture stainless steel sheets as per the international standards on basis on ASTM, ASME, DIN and UNS and quality used by us is trusted from vendors and it is tested before delivering to the customers. We provide various series and types of sheets and also customization is offered as per the requirements of customer. For fabrication purposes, keep in mind that 300 series stainless steel sheet cannot be heat treated, but does work harden rapidly, is ductile, and is austenitic (nonmagnetic).
Industrial Use of Stainless Steel sheets
· Chemical and fuel tankers
· Chemical and petro-chemical plants
· Food processing and pharmaceutical industries where clean environments are required
· Construction, modern architecture
Surface Treatment | Hot Rolled |
Material | SS |
Thickness | 0.5 mm to 100mm |
Finish | No 1,No 2,No 3,No 4,BA,Mirror,2B,PVC Coated |
Shape | Rectangular |
Technique | Hot Rolled |
Material Grade | 316,316L |
Available Length Range | 100 mm to 8000 mm |
Available Width Range | 1000 mm to 2000 mm |
Standards | ASTM,DIN,JIS,ASME |
DM Metalloys Pvt. Ltd. is one of the leading manufacturer, supplier, and stockist of stainless steel sheets, located in Mumbai. We manufacture stainless steel sheets as per the international standards on basis on ASTM, ASME, DIN and UNS and quality used by us is trusted from vendors and it is tested before delivering to the customers. We provide various series and types of sheets and also customization is offered as per the requirements of customer. For fabrication purposes, keep in mind that 300 series stainless steel sheet cannot be heat treated, but does work harden rapidly, is ductile, and is austenitic (nonmagnetic).
Industrial Use of Stainless Steel sheets